AM26LV32IDR vs DS90C032TM 比較
詳細並排比較 AM26LV32IDR 由 Texas Instruments 與 DS90C032TM 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | AM26LV32IDR | DS90C032TM |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Device Type | Quadruple differential line receiver | — |
| Interface Standard | TIA/EIA-422-B and ITU Recommendation V.11 receiver | — |
| 供應電壓 | 3.0 V to 3.6 V | 5 V |
| Nominal Supply Voltage | 3.3 V | — |
| Number of Receivers | 4 | — |
| Maximum Switching Rate | 32 MHz | — |
| Architecture | BiCMOS | — |
| 輸出類型 | 3-state differential receiver outputs | — |
| Enable Control | Common enable for all four receivers | — |
| Power Dissipation | 27 mW | Ultra-low power dissipation |
| 封裝 | 16-pin SOIC, plastic MS-012AC | 16-pin SOIC |
| 安裝類型 | Surface mount | Surface mount |
| 工作溫度範圍 | 0 C to 70 C for AM26LV32ID | [DATA_NEEDED: operating temperature range] |
| Terminal Count | 16 | — |
| Technology | BiCMOS | LVDS |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Input Differential Voltage | [DATA_NEEDED: input differential voltage range] | — |
| Output High-Level Voltage | [DATA_NEEDED: output high-level voltage] | — |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Input Current | [DATA_NEEDED: input current] | — |
| Enable Pin Levels | [DATA_NEEDED: enable input thresholds] | — |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| RoHS 狀態 | Compliant | [DATA_NEEDED: RoHS status] |
| MSL | Level 1, 260 C unlimited | — |
| Receiver Type | — | LVDS quad CMOS differential line receiver |
| Number of Receiver Channels | — | 4 channels |
| Process Technology | — | CMOS |
| Maximum Supported Data Rate | — | In excess of 155.5 Mbps |
| 最大時脈頻率 | — | 77.7 MHz |
| Differential Input Signal Voltage | — | 350 mV |
| Output Level | — | CMOS, TTL-compatible |
| Output Control | — | TRI-STATE |
| 供應電流 | — | [DATA_NEEDED: supply current] |
| Input Termination | — | [DATA_NEEDED: differential input termination] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |