ATMEGA329-16AU vs ATMEGA329P-20AU Comparison

Detailed side-by-side comparison of ATMEGA329-16AU by Microchip Technology and ATMEGA329P-20AU by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
ATMEGA329-16AU ATMEGA329-16AU - 8-bit AVR MCU 16MHz 32KB Flash LCD | Microchip

ATMEGA329-16AU - 8-bit AVR MCU 16MHz 32KB Flash LCD | Microchip

ATMEGA329-16AU βœ“ Active
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU βœ“ Active

Specification Comparison

Parameter ATMEGA329-16AU ATMEGA329P-20AU
Brand Microchip Technology Microchip Technology
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $8.45 $4.71
Core Architecture 8-bit AVR RISC AVR (8-bit RISC, Harvard)
Maximum Clock Frequency 16 MHz β€”
Flash Program Memory 32 KB (16K x 16) β€”
EEPROM 1 KB 1 KB
SRAM 2 KB 2 KB (2K x 8)
Supply Voltage Range 4.5 V to 5.5 V β€”
General Purpose I/O Lines 54 β€”
Package 64-TQFP (14x14 mm), 0.8 mm pitch 64-pin TQFP (14x14 mm, 0.8 mm pitch)
LCD Controller On-chip segment LCD controller with internal contrast control β€”
JTAG Interface Yes (boundary-scan, on-chip debug, programming) β€”
In-System Programming Yes (ISP Flash, read-while-write) β€”
General Purpose Working Registers 32 β€”
Instructions 130+ powerful instructions, most single-clock cycle β€”
Mounting Type Surface Mount Surface Mount
Life Cycle Stage Active β€”
RoHS Status [DATA_NEEDED: RoHS status] Compliant (Pb-free / Green)
Operating Temperature [DATA_NEEDED: operating temperature range] -40C to +85C (industrial, -A suffix)
Instruction Set β€” 131 instructions, mostly single-cycle
Program Memory (Flash) β€” 32 KB (16K x 16), In-System Programmable with RWW
Maximum Clock Speed β€” 20 MHz
Throughput β€” Up to 20 MIPS at 20 MHz
Supply Voltage (Vcc) β€” 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
General-Purpose I/O Pins β€” 54
General-Purpose Working Registers β€” 32
ADC β€” 10-bit, up to 8 single-ended channels
PWM Channels β€” 6
Communication Peripherals β€” 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Debug Interface β€” JTAG (IEEE 1149.1 compliant)
Power-Save Modes β€” Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
QTouch Support β€” Yes (peripheral touch controller via library)

Datasheets & Resources

Browse All Products Create BOM Request Quote