ATMEGA329-16AU vs ATMEGA329P-20AU Vergleich
Detaillierter Direktvergleich von ATMEGA329-16AU von Microchip Technology und ATMEGA329P-20AU von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATMEGA329-16AU - 8-bit AVR MCU 16MHz 32KB Flash LCD | Microchip
ATMEGA329-16AU ✓ AktivMicrochip Technology
ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64
ATMEGA329P-20AU ✓ AktivSpezifikationsvergleich
| Parameter | ATMEGA329-16AU | ATMEGA329P-20AU |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,45 | $4,71 |
| Core Architecture | 8-bit AVR RISC | AVR (8-bit RISC, Harvard) |
| Maximale Taktfrequenz | 16 MHz | — |
| Flash Program Memory | 32 KB (16K x 16) | — |
| EEPROM | 1 KB | 1 KB |
| SRAM | 2 KB | 2 KB (2K x 8) |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| General Purpose I/O Lines | 54 | — |
| Gehäuse | 64-TQFP (14x14 mm), 0.8 mm pitch | 64-pin TQFP (14x14 mm, 0.8 mm pitch) |
| LCD Controller | On-chip segment LCD controller with internal contrast control | — |
| JTAG Interface | Yes (boundary-scan, on-chip debug, programming) | — |
| In-System Programming | Yes (ISP Flash, read-while-write) | — |
| General Purpose Working Registers | 32 | — |
| Instructions | 130+ powerful instructions, most single-clock cycle | — |
| Montageart | Surface Mount | Surface Mount |
| Life Cycle Stage | Active | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant (Pb-free / Green) |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40C to +85C (industrial, -A suffix) |
| Instruction Set | — | 131 instructions, mostly single-cycle |
| Program Memory (Flash) | — | 32 KB (16K x 16), In-System Programmable with RWW |
| Maximum Clock Speed | — | 20 MHz |
| Throughput | — | Up to 20 MIPS at 20 MHz |
| Supply Voltage (Vcc) | — | 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V) |
| General-Purpose I/O Pins | — | 54 |
| General-Purpose Working Registers | — | 32 |
| ADC | — | 10-bit, up to 8 single-ended channels |
| PWM Channels | — | 6 |
| Communication Peripherals | — | 2x USART, 1x TWI (I2C), 1x SPI (also ISP) |
| Debug Interface | — | JTAG (IEEE 1149.1 compliant) |
| Power-Save Modes | — | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower) |
| QTouch Support | — | Yes (peripheral touch controller via library) |