ATMEGA3290P-20AU vs ATMEGA329P-20AU Comparison

Detailed side-by-side comparison of ATMEGA3290P-20AU by Microchip Technology and ATMEGA329P-20AU by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
ATMEGA3290P-20AU ATMEGA3290P-20AU - AVR 8-Bit MCU 20MHz 32KB Flash TQFP-100 | Microchip

ATMEGA3290P-20AU - AVR 8-Bit MCU 20MHz 32KB Flash TQFP-100 | Microchip

ATMEGA3290P-20AU βœ“ Active
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU βœ“ Active

Specification Comparison

Parameter ATMEGA3290P-20AU ATMEGA329P-20AU
Brand Microchip Technology Microchip Technology
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $9.62 $4.71
Core Processor AVR β€”
Core Size 8-Bit β€”
Speed 20 MHz β€”
Flash Memory 32 KB (16K x 16) β€”
SRAM 2 KB 2 KB (2K x 8)
EEPROM 1 KB 1 KB
General Purpose I/O 69 β€”
Working Registers 32 β€”
Instruction Set 131 powerful instructions 131 instructions, mostly single-cycle
Supply Voltage 4.5 V to 5.5 V β€”
Package 100-TQFP (14x14 mm, 0.8 mm pitch) 64-pin TQFP (14x14 mm, 0.8 mm pitch)
Mounting Type Surface Mount Surface Mount
Operating Temperature -40C to +85C (industrial) -40C to +85C (industrial, -A suffix)
Low Power Technology picoPower β€”
Programming / Debug ICSP, debugWIRE (via MPLAB SNAP) β€”
LCD Controller Yes (segment LCD drive) β€”
Lifecycle Status ACTIVE β€”
Core Architecture β€” AVR (8-bit RISC, Harvard)
Program Memory (Flash) β€” 32 KB (16K x 16), In-System Programmable with RWW
Maximum Clock Speed β€” 20 MHz
Throughput β€” Up to 20 MIPS at 20 MHz
Supply Voltage (Vcc) β€” 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
General-Purpose I/O Pins β€” 54
General-Purpose Working Registers β€” 32
ADC β€” 10-bit, up to 8 single-ended channels
PWM Channels β€” 6
Communication Peripherals β€” 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Debug Interface β€” JTAG (IEEE 1149.1 compliant)
RoHS Status β€” Compliant (Pb-free / Green)
Power-Save Modes β€” Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
QTouch Support β€” Yes (peripheral touch controller via library)

Datasheets & Resources

Browse All Products Create BOM Request Quote