ATMEGA3290P-20AU vs ATMEGA329P-20AU Comparaison

Comparaison détaillée côte à côte de ATMEGA3290P-20AU par Microchip Technology et ATMEGA329P-20AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA3290P-20AU ATMEGA3290P-20AU - AVR 8-Bit MCU 20MHz 32KB Flash TQFP-100 | Microchip

ATMEGA3290P-20AU - AVR 8-Bit MCU 20MHz 32KB Flash TQFP-100 | Microchip

ATMEGA3290P-20AU ✓ Actif
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA3290P-20AU ATMEGA329P-20AU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $9,62 $4,71
Core Processor AVR —
Core Size 8-Bit —
Speed 20 MHz —
Flash Memory 32 KB (16K x 16) —
SRAM 2 KB 2 KB (2K x 8)
EEPROM 1 KB 1 KB
General Purpose I/O 69 —
Working Registers 32 —
Instruction Set 131 powerful instructions 131 instructions, mostly single-cycle
Tension d'alimentation 4.5 V to 5.5 V —
Boîtier 100-TQFP (14x14 mm, 0.8 mm pitch) 64-pin TQFP (14x14 mm, 0.8 mm pitch)
Type de montage Surface Mount Surface Mount
Température de fonctionnement -40C to +85C (industrial) -40C to +85C (industrial, -A suffix)
Low Power Technology picoPower —
Programming / Debug ICSP, debugWIRE (via MPLAB SNAP) —
LCD Controller Yes (segment LCD drive) —
Statut du cycle de vie ACTIVE —
Core Architecture — AVR (8-bit RISC, Harvard)
Program Memory (Flash) — 32 KB (16K x 16), In-System Programmable with RWW
Maximum Clock Speed — 20 MHz
Throughput — Up to 20 MIPS at 20 MHz
Supply Voltage (Vcc) — 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
General-Purpose I/O Pins — 54
General-Purpose Working Registers — 32
ADC — 10-bit, up to 8 single-ended channels
PWM Channels — 6
Communication Peripherals — 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Debug Interface — JTAG (IEEE 1149.1 compliant)
Statut RoHS — Compliant (Pb-free / Green)
Power-Save Modes — Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
QTouch Support — Yes (peripheral touch controller via library)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis