BTS3060TFATMA1 vs BTS3125TFATMA1 Comparison
Detailed side-by-side comparison of BTS3060TFATMA1 by Infineon and BTS3125TFATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS3060TFATMA1 | BTS3125TFATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.65 | $0.54 |
| Product Type | Smart Low-Side Power Switch | Single-channel N-channel low-side smart power switch |
| Manufacturer Family | HITFET | — |
| Number of Channels | 1 | — |
| On-Resistance (RDS(on) typ) | 50 mΩ at 25°C | — |
| Maximum Continuous Load Current | 3 A | — |
| Maximum Load Supply Voltage | 42 V | — |
| Transistor Type | N-Channel Vertical Power MOSFET (monolithically integrated) | — |
| Switch Configuration | Low-Side, 1:1 | — |
| Input Type | Logic-level gate input (3.3V / 5V compatible) | — |
| Diagnostic Output | Status pin (open-drain, requires pull-up) | — |
| Embedded Protection | Overcurrent, Overtemperature, Overvoltage, Open-load detection | — |
| Package | PG-TO252-3 (DPAK), 3 pins (2+Tab) | PG-TO252-3-313 (DPAK, SC-63) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | -40°C to +150°C (junction) | -40°C to +150°C |
| Automotive Qualification | AEC-Q100 qualified | — |
| Packaging | Tape & Reel (TF suffix) | — |
| RoHS Status | Compliant | Compliant |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| Thermal Resistance, Junction-to-Ambient | — | [DATA_NEEDED: theta_JA value] |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| ESD Protection | — | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Status Flag Output | — | Yes (fault feedback) |
| MSL Level | — | [DATA_NEEDED: MSL moisture sensitivity level] |