BTS3060TFATMA1 vs BTS3125TFATMA1 Comparaison

Comparaison détaillée côte à côte de BTS3060TFATMA1 par Infineon et BTS3125TFATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Comparaison des spécifications

Paramètre BTS3060TFATMA1 BTS3125TFATMA1
Marque Infineon Infineon
Catégorie Power MOSFET Drivers Power MOSFET Drivers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,65 $0,54
Product Type Smart Low-Side Power Switch Single-channel N-channel low-side smart power switch
Manufacturer Family HITFET —
Number of Channels 1 —
On-Resistance (RDS(on) typ) 50 mΩ at 25°C —
Maximum Continuous Load Current 3 A —
Maximum Load Supply Voltage 42 V —
Type de transistor N-Channel Vertical Power MOSFET (monolithically integrated) —
Switch Configuration Low-Side, 1:1 —
Input Type Logic-level gate input (3.3V / 5V compatible) —
Diagnostic Output Status pin (open-drain, requires pull-up) —
Embedded Protection Overcurrent, Overtemperature, Overvoltage, Open-load detection —
Boîtier PG-TO252-3 (DPAK), 3 pins (2+Tab) PG-TO252-3-313 (DPAK, SC-63)
Type de montage Surface Mount Surface Mount
Plage de température de fonctionnement -40°C to +150°C (junction) -40°C to +150°C
Automotive Qualification AEC-Q100 qualified —
Packaging Tape & Reel (TF suffix) —
Statut RoHS Compliant Compliant
Load Current (continuous) — 2 A
Load Current (pulsed) — [DATA_NEEDED: pulsed drain current limit]
RDS(on) typical — 250 mΩ at 5 V Vbb
Supply Voltage (Vbb, nominal) — 5 V
Supply Voltage (Vbb, operating) — 5 V to 28 V
Load Dump Transient Protection — 40 V
Input Logic Compatibility — 3.3 V / 5 V CMOS
On-State Resistance (max) — [DATA_NEEDED: maximum RDS(on) over temp]
Résistance thermique, jonction-ambiance — [DATA_NEEDED: theta_JA value]
Over-temperature Shutdown — ~150°C with auto-restart
Short-Circuit Protection — Yes, current-limited
Over-voltage Protection — Yes (clamping at 40 V)
ESD Protection — Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating])
Status Flag Output — Yes (fault feedback)
Niveau MSL — [DATA_NEEDED: MSL moisture sensitivity level]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis