BTS70202EPAXUMA1 vs BTS70121EPAXUMA1 Comparison
Detailed side-by-side comparison of BTS70202EPAXUMA1 by Infineon and BTS70121EPAXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS70202EPAXUMA1 | BTS70121EPAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Smart High-Side Power Switch (dual channel) | Smart High-Side Power Switch |
| Technology | SMART7 (PROFET family) | — |
| Number of Channels | 2 | 1 |
| Output Configuration | High-side, 1:1 N-Channel MOSFET per channel | High-Side |
| Continuous Load Current (per channel) | 2.5 A | — |
| Total Device Load Current | 5 A | — |
| On-State Resistance (typ, per channel) | 30 mΩ | — |
| Operating Voltage Range (Vbb) | 6 V to 18 V (load dump tolerant) | — |
| Current Limit (typ) | 12 A (selectable) | — |
| Diagnostic Output | Analog current sense (IS pin) per channel | — |
| Protection Features | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Package | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | -40 C to +150 C (junction) | -40C to +150C (junction, AEC-Q100) |
| Packing | Tape & Reel (XUMA1 suffix) | — |
| RoHS Status | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | PROFET+2 (Protected FET) |
| Switch Type | — | N-Channel (2x8 mOhm integrated) |
| Maximum Output Current | — | 8.5 A |
| On-State Resistance (RDS(on)) | — | 2 x 8 mOhm (typical) |
| Pin Pitch | — | 0.65 mm |
| Automotive Qualification | — | AEC-Q100 |
| Supply Voltage (Vbb) | — | [DATA_NEEDED: Vbb operating range] |
| Load Dump Protection | — | Yes (integrated) |
| Reverse Battery Protection | — | Yes (compatible with harshest requirements per family datasheet) |
| Diagnostics | — | Current sense / status output |
| Protections | — | Overload, short-circuit, over-temperature, over-voltage |
| Packaging | — | Tape & Reel |
| MSL Level | — | MSL2 or MSL3 (per JEDEC J-STD-020) |
| RoHS Compliance | — | Compliant |