BTS70202EPAXUMA1 vs BTS70121EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70202EPAXUMA1 par Infineon et BTS70121EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70202EPAXUMA1 | BTS70121EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $1,05 |
| Product Type | Smart High-Side Power Switch (dual channel) | Smart High-Side Power Switch |
| Technology | SMART7 (PROFET family) | — |
| Number of Channels | 2 | 1 |
| Configuration de sortie | High-side, 1:1 N-Channel MOSFET per channel | High-Side |
| Continuous Load Current (per channel) | 2.5 A | — |
| Total Device Load Current | 5 A | — |
| On-State Resistance (typ, per channel) | 30 mΩ | — |
| Operating Voltage Range (Vbb) | 6 V to 18 V (load dump tolerant) | — |
| Current Limit (typ) | 12 A (selectable) | — |
| Diagnostic Output | Analog current sense (IS pin) per channel | — |
| Protection Features | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Boîtier | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | -40C to +150C (junction, AEC-Q100) |
| Packing | Tape & Reel (XUMA1 suffix) | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | PROFET+2 (Protected FET) |
| Switch Type | — | N-Channel (2x8 mOhm integrated) |
| Courant de sortie maximal | — | 8.5 A |
| On-State Resistance (RDS(on)) | — | 2 x 8 mOhm (typical) |
| Pin Pitch | — | 0.65 mm |
| Automotive Qualification | — | AEC-Q100 |
| Supply Voltage (Vbb) | — | [DATA_NEEDED: Vbb operating range] |
| Load Dump Protection | — | Yes (integrated) |
| Reverse Battery Protection | — | Yes (compatible with harshest requirements per family datasheet) |
| Diagnostics | — | Current sense / status output |
| Protections | — | Overload, short-circuit, over-temperature, over-voltage |
| Packaging | — | Tape & Reel |
| Niveau MSL | — | MSL2 or MSL3 (per JEDEC J-STD-020) |
| RoHS Compliance | — | Compliant |