CY7C65213-28PVXI vs CP2102N-A02-GQFN28 Comparison
Detailed side-by-side comparison of CY7C65213-28PVXI by Infineon and CP2102N-A02-GQFN28 by Silicon Labs. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ ActiveSilicon Labs
CP2102N-A02-GQFN28 USB-to-UART Bridge, QFN28 | Silicon Labs
CP2102N-A02-GQFN28 ✓ ActiveSpecification Comparison
| Parameter | CY7C65213-28PVXI | CP2102N-A02-GQFN28 |
|---|---|---|
| Brand | Infineon | Silicon Labs |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $3.30 | $2.35 |
| Product Type | USB-to-UART Bridge Controller | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | — |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | 48 MHz (no external crystal required) |
| GPIO Pins | Available (multi-function) | — |
| Package | 28-pin SSOP | QFN-28 (5x5 mm) |
| Operating Voltage | 5.0 V (VBUS-powered) | — |
| Operating Temperature Range | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| Function | — | USB 2.0 to UART Bridge Controller |
| Protocol | — | USB 2.0 Full-Speed |
| Supply Voltage (VDD) | — | 3 V to 3.6 V |
| I/O Voltage (VIO) | — | 1.8 V to VDD |
| Maximum Baud Rate | — | 3 Mbaud |
| USB Speed | — | Full-Speed (12 Mbps) |
| Digital I/O Pins | — | 7 |
| Internal Regulator Output | — | 3.3 V |
| Internal Regulator Current | — | Up to 100 mA (external load) |
| ROM for Descriptors | — | 960 bytes (one-time programmable) |
| UART Data Bits | — | 5, 6, 7, or 8 (programmable) |
| Hardware Flow Control | — | RTS/CTS supported |
| Operating Temperature | — | -40C to +85C |