CY7C65213-28PVXI vs CP2102N-A02-GQFN28 Comparaison
Comparaison détaillée côte à côte de CY7C65213-28PVXI par Infineon et CP2102N-A02-GQFN28 par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ Actif
Comparaison des spécifications
| Paramètre | CY7C65213-28PVXI | CP2102N-A02-GQFN28 |
|---|---|---|
| Marque | Infineon | Silicon Labs |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,30 | $2,35 |
| Product Type | USB-to-UART Bridge Controller | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | — |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | 48 MHz (no external crystal required) |
| GPIO Pins | Available (multi-function) | — |
| Boîtier | 28-pin SSOP | QFN-28 (5x5 mm) |
| Operating Voltage | 5.0 V (VBUS-powered) | — |
| Plage de température de fonctionnement | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| Fonction | — | USB 2.0 to UART Bridge Controller |
| Protocol | — | USB 2.0 Full-Speed |
| Supply Voltage (VDD) | — | 3 V to 3.6 V |
| I/O Voltage (VIO) | — | 1.8 V to VDD |
| Maximum Baud Rate | — | 3 Mbaud |
| USB Speed | — | Full-Speed (12 Mbps) |
| Digital I/O Pins | — | 7 |
| Internal Regulator Output | — | 3.3 V |
| Internal Regulator Current | — | Up to 100 mA (external load) |
| ROM for Descriptors | — | 960 bytes (one-time programmable) |
| UART Data Bits | — | 5, 6, 7, or 8 (programmable) |
| Hardware Flow Control | — | RTS/CTS supported |
| Température de fonctionnement | — | -40C to +85C |