DRV8434ARGER vs DRV8886PWPR Comparison
Detailed side-by-side comparison of DRV8434ARGER by Texas Instruments and DRV8886PWPR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | DRV8434ARGER | DRV8886PWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $2.65 | $1.52 |
| Motor Type | Bipolar stepper | Bipolar stepper (2-phase) |
| Number of H-Bridges | 2 | — |
| Output Configuration | NMOS H-bridge | — |
| Supply Voltage (VM) | 4.5 V to 48 V | — |
| Full-Scale Output Current | 2.5 A per phase (peak) | — |
| RMS Output Current | 1.5 A per phase (typical) | 1.4 A (24 V, TA = 25 C, PCB-dependent) |
| Microstepping Resolution | Full-step to 1/256 step | — |
| Current Sensing | Integrated (no external sense resistor) | Internal (no external sense resistor) |
| Stall Detection | Yes (GPIO output) | — |
| Decay Mode | Smart Tune (mixed decay) | — |
| Control Interface | Step/Direction + SPI | STEP / DIR |
| Sleep Pin | Yes (nSLEEP, active low) | — |
| Fault Pin | Yes (nFAULT, active low, open-drain) | — |
| Protection Features | UVLO, OCP, OVP, OTP, open load, stall | UVLO, OCP, TSD, open-load detect, charge-pump UV |
| Operating Temperature | -40 C to +125 C | — |
| Package | VQFN-24 (RGE) 4x4 mm with thermal pad | HTSSOP-24 (PWP) with PowerPAD |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 2 (1 year floor life) | — |
| RoHS Status | Compliant | Compliant |
| Number of Full H-Bridges | — | 2 |
| Operating Supply Voltage (VM) | — | 8 V to 37 V |
| Absolute Maximum VM | — | 40 V |
| Full-Scale Output Current (per phase) | — | 2 A |
| Peak Output Current | — | 3 A |
| HS + LS On-Resistance (RDSon) | — | 550 mOhm |
| Microstepping Levels | — | Up to 1/16 step |
| Decay Modes | — | 8 configurable modes including Smart Tune |
| PWM Chopping Frequency | — | Up to 50 kHz |
| Sleep Current | — | 20 uA (typical) |
| Logic Supply Voltage (VINT) | — | 3 V to 5.5 V |
| Operating Temperature Range | — | -40 C to +125 C |
| Fault Output | — | nFAULT (active-low, open-drain) |
| AEC-Q100 Qualified | — | No (use DRV8886ATPWP for automotive) |