DRV8434ARGER vs DRV8886PWPR 比較

詳細な並列比較: DRV8434ARGER メーカー: Texas Instruments および DRV8886PWPR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
DRV8434ARGER DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER ✓ 生産中
Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ 生産中

仕様比較

パラメータ DRV8434ARGER DRV8886PWPR
ブランド Texas Instruments Texas Instruments
カテゴリ Motor Drivers Motor Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $2.65 $1.52
Motor Type Bipolar stepper Bipolar stepper (2-phase)
Number of H-Bridges 2 —
出力構成 NMOS H-bridge —
Supply Voltage (VM) 4.5 V to 48 V —
Full-Scale Output Current 2.5 A per phase (peak) —
RMS Output Current 1.5 A per phase (typical) 1.4 A (24 V, TA = 25 C, PCB-dependent)
Microstepping Resolution Full-step to 1/256 step —
Current Sensing Integrated (no external sense resistor) Internal (no external sense resistor)
Stall Detection Yes (GPIO output) —
Decay Mode Smart Tune (mixed decay) —
Control Interface Step/Direction + SPI STEP / DIR
Sleep Pin Yes (nSLEEP, active low) —
Fault Pin Yes (nFAULT, active low, open-drain) —
Protection Features UVLO, OCP, OVP, OTP, open load, stall UVLO, OCP, TSD, open-load detect, charge-pump UV
動作温度 -40 C to +125 C —
パッケージ VQFN-24 (RGE) 4x4 mm with thermal pad HTSSOP-24 (PWP) with PowerPAD
実装タイプ Surface Mount Surface Mount
MSLレベル 2 (1 year floor life) —
RoHS ステータス Compliant Compliant
Number of Full H-Bridges — 2
Operating Supply Voltage (VM) — 8 V to 37 V
Absolute Maximum VM — 40 V
Full-Scale Output Current (per phase) — 2 A
Peak Output Current — 3 A
HS + LS On-Resistance (RDSon) — 550 mOhm
Microstepping Levels — Up to 1/16 step
Decay Modes — 8 configurable modes including Smart Tune
PWM Chopping Frequency — Up to 50 kHz
Sleep Current — 20 uA (typical)
Logic Supply Voltage (VINT) — 3 V to 5.5 V
動作温度範囲 — -40 C to +125 C
Fault Output — nFAULT (active-low, open-drain)
AEC-Q100 Qualified — No (use DRV8886ATPWP for automotive)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼