DRV8873HPWPR vs DRV8434ARGER Comparison
Detailed side-by-side comparison of DRV8873HPWPR by Texas Instruments and DRV8434ARGER by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ Active
Specification Comparison
| Parameter | DRV8873HPWPR | DRV8434ARGER |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.86 | $2.65 |
| Motor Type | Brushed DC | Bipolar stepper |
| Topology | H-Bridge (4 N-channel MOSFETs) | — |
| Supply Voltage (VM) | 4.5 V to 38 V | 4.5 V to 48 V |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | Step/Direction + SPI |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C |
| Package | 24-pin HTSSOP (PWP) with PowerPAD | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 3 (168 hr / 260 C) | 2 (1 year floor life) |
| RoHS Status | Compliant | Compliant |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Number of H-Bridges | — | 2 |
| Output Configuration | — | NMOS H-bridge |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| RMS Output Current | — | 1.5 A per phase (typical) |
| Microstepping Resolution | — | Full-step to 1/256 step |
| Current Sensing | — | Integrated (no external sense resistor) |
| Stall Detection | — | Yes (GPIO output) |
| Decay Mode | — | Smart Tune (mixed decay) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Protection Features | — | UVLO, OCP, OVP, OTP, open load, stall |