DRV8873HPWPR vs DRV8434ARGER Vergleich
Detaillierter Direktvergleich von DRV8873HPWPR von Texas Instruments und DRV8434ARGER von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ Aktiv
Spezifikationsvergleich
| Parameter | DRV8873HPWPR | DRV8434ARGER |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,86 | $2,65 |
| Motor Type | Brushed DC | Bipolar stepper |
| Topologie | H-Bridge (4 N-channel MOSFETs) | — |
| Supply Voltage (VM) | 4.5 V to 38 V | 4.5 V to 48 V |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | Step/Direction + SPI |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| Betriebstemperatur | -40 C to +125 C | -40 C to +125 C |
| Gehäuse | 24-pin HTSSOP (PWP) with PowerPAD | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (168 hr / 260 C) | 2 (1 year floor life) |
| RoHS-Status | Compliant | Compliant |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Number of H-Bridges | — | 2 |
| Ausgangskonfiguration | — | NMOS H-bridge |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| RMS Output Current | — | 1.5 A per phase (typical) |
| Microstepping Resolution | — | Full-step to 1/256 step |
| Current Sensing | — | Integrated (no external sense resistor) |
| Stall Detection | — | Yes (GPIO output) |
| Decay Mode | — | Smart Tune (mixed decay) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Protection Features | — | UVLO, OCP, OVP, OTP, open load, stall |