DRV8873HPWPR vs DRV8806PWPR Comparison
Detailed side-by-side comparison of DRV8873HPWPR by Texas Instruments and DRV8806PWPR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ ActiveSpecification Comparison
| Parameter | DRV8873HPWPR | DRV8806PWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.86 | $3.20 |
| Motor Type | Brushed DC | — |
| Topology | H-Bridge (4 N-channel MOSFETs) | — |
| Supply Voltage (VM) | 4.5 V to 38 V | 8.2 V to 38 V |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | — |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| Operating Temperature | -40 C to +125 C | -40C to +85C |
| Package | 24-pin HTSSOP (PWP) with PowerPAD | HTSSOP-16 (PWP) with PowerPAD |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 3 (168 hr / 260 C) | 2 |
| RoHS Status | Compliant | Compliant |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Number of Channels | — | 4 (quad low-side) |
| Output Configuration | — | Low-side DMOS, open drain |
| Continuous Output Current per Channel | — | 2 A |
| Peak Output Current per Channel | — | 3 A |
| RDS(on) per Channel | — | 200 mOhm (typical) |
| Interface | — | SPI (serial, 3.3 V logic) |
| Open-Load Detection | — | Yes, via SPI |
| Overcurrent Protection | — | Yes, per channel |
| Thermal Shutdown | — | Yes |
| Undervoltage Lockout | — | Yes |
| Built-in Clamp Diodes | — | Yes (freewheeling) |