DRV8873HPWPR vs DRV8806PWPR Comparación
Comparación detallada lado a lado de DRV8873HPWPR por Texas Instruments y DRV8806PWPR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ Activo
Comparación de especificaciones
| Parámetro | DRV8873HPWPR | DRV8806PWPR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Motor Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,86 | $3,20 |
| Motor Type | Brushed DC | — |
| Topología | H-Bridge (4 N-channel MOSFETs) | — |
| Supply Voltage (VM) | 4.5 V to 38 V | 8.2 V to 38 V |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | — |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| Temperatura de funcionamiento | -40 C to +125 C | -40C to +85C |
| Encapsulado | 24-pin HTSSOP (PWP) with PowerPAD | HTSSOP-16 (PWP) with PowerPAD |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 3 (168 hr / 260 C) | 2 |
| Estado RoHS | Compliant | Compliant |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Number of Channels | — | 4 (quad low-side) |
| Configuración de salida | — | Low-side DMOS, open drain |
| Continuous Output Current per Channel | — | 2 A |
| Peak Output Current per Channel | — | 3 A |
| RDS(on) per Channel | — | 200 mOhm (typical) |
| Interfaz | — | SPI (serial, 3.3 V logic) |
| Open-Load Detection | — | Yes, via SPI |
| Protección contra sobrecorriente | — | Yes, per channel |
| Apagado térmico | — | Yes |
| Undervoltage Lockout | — | Yes |
| Built-in Clamp Diodes | — | Yes (freewheeling) |