DS90LV018ATM vs SN65HVD230DR Comparison
Detailed side-by-side comparison of DS90LV018ATM by Texas Instruments and SN65HVD230DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActiveSpecification Comparison
| Parameter | DS90LV018ATM | SN65HVD230DR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | LVDS single differential line receiver | CAN Bus Transceiver |
| Logic Family | CMOS | — |
| Supply Voltage | 3 V | 3 V to 3.6 V (3.3 V nominal) |
| Maximum Data Rate | Greater than 400 Mbps | 1 Mbps |
| Maximum Clock Frequency | 200 MHz | — |
| Typical Differential Input Voltage | 350 mV | — |
| Output Logic Level | 3 V CMOS | — |
| Propagation Delay | 1.5 ns | — |
| Quiescent Current | 9 mA | — |
| Operating Temperature Range | -40 °C to +85 °C | — |
| Package | 8-pin SOIC | 8-SOIC (D) |
| Mounting Type | Surface mount | Surface Mount |
| Fail-Safe Input Support | Open, shorted, and 100 Ω terminated inputs | — |
| Fail-Safe Output State | HIGH | — |
| PCB Layout Style | Flow-through | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Operating Temperature | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |