DS90LV018ATM vs SN65HVD230DR Comparaison
Comparaison détaillée côte à côte de DS90LV018ATM par Texas Instruments et SN65HVD230DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActifComparaison des spécifications
| Paramètre | DS90LV018ATM | SN65HVD230DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | LVDS single differential line receiver | CAN Bus Transceiver |
| Logic Family | CMOS | — |
| Tension d'alimentation | 3 V | 3 V to 3.6 V (3.3 V nominal) |
| Maximum Data Rate | Greater than 400 Mbps | 1 Mbps |
| Fréquence d'horloge maximale | 200 MHz | — |
| Typical Differential Input Voltage | 350 mV | — |
| Output Logic Level | 3 V CMOS | — |
| Propagation Delay | 1.5 ns | — |
| Courant de repos | 9 mA | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | — |
| Boîtier | 8-pin SOIC | 8-SOIC (D) |
| Type de montage | Surface mount | Surface Mount |
| Fail-Safe Input Support | Open, shorted, and 100 Ω terminated inputs | — |
| Fail-Safe Output State | HIGH | — |
| PCB Layout Style | Flow-through | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Température de fonctionnement | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |