INA101KU vs INA101AM Comparison
Detailed side-by-side comparison of INA101KU by Texas Instruments and INA101AM by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA101KU - High Accuracy Instrumentation Amp | Texas Instruments
INA101KU ✓ ActiveTexas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ ActiveSpecification Comparison
| Parameter | INA101KU | INA101AM |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 | — |
| Internal Topology | 3-amplifier (three op amp) architecture | — |
| Input Offset Voltage | 25 uV max | — |
| Offset Voltage Drift | 0.25 uV/C max | — |
| Nonlinearity | 0.002% max | 0.002% |
| Input Voltage Noise | 13 nV/Hz | — |
| Common-Mode Rejection | High CMR at 60 Hz | — |
| Input Impedance | 10^10 ohm | 10 GΩ |
| Supply Voltage Range | +/-5 V to +/-20 V | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] |
| Slew Rate | 0.4 V/uS | — |
| Bandwidth | 25 kHz | Approximately 300 kHz |
| Gain Setting | Single external resistor RG | — |
| Package | 16-SOIC (DW / SOL-16) | TO-100-10 |
| Mounting Type | Surface Mount | Through-hole |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Product Type | — | Instrumentation Amplifier |
| Number of Channels | — | 1 channel |
| Architecture | — | Three precision operational amplifiers with laser-trimmed metal-film resistors |
| Input Type | — | Differential |
| Maximum Supply Voltage | — | ±20 V |
| Offset Voltage | — | 25 mV maximum |
| Input Drift | — | 0.25 mV/°C maximum |
| Noise Density | — | 13 nV/√Hz |
| Common-Mode Rejection Ratio | — | 106 dB at 60 Hz |
| Application Areas | — | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |