INA101KU vs INA101AM Vergleich
Detaillierter Direktvergleich von INA101KU von Texas Instruments und INA101AM von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ AktivSpezifikationsvergleich
| Parameter | INA101KU | INA101AM |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 | — |
| Internal Topology | 3-amplifier (three op amp) architecture | — |
| Input Offset Voltage | 25 uV max | — |
| Offset Voltage Drift | 0.25 uV/C max | — |
| Nonlinearity | 0.002% max | 0.002% |
| Input Voltage Noise | 13 nV/Hz | — |
| Common-Mode Rejection | High CMR at 60 Hz | — |
| Input Impedance | 10^10 ohm | 10 GΩ |
| Supply Voltage Range | +/-5 V to +/-20 V | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] |
| Slew Rate | 0.4 V/uS | — |
| Bandwidth | 25 kHz | Approximately 300 kHz |
| Gain Setting | Single external resistor RG | — |
| Gehäuse | 16-SOIC (DW / SOL-16) | TO-100-10 |
| Montageart | Surface Mount | Through-hole |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Product Type | — | Instrumentation Amplifier |
| Number of Channels | — | 1 channel |
| Architecture | — | Three precision operational amplifiers with laser-trimmed metal-film resistors |
| Input Type | — | Differential |
| Maximum Supply Voltage | — | ±20 V |
| Offset Voltage | — | 25 mV maximum |
| Input Drift | — | 0.25 mV/°C maximum |
| Rauschdichte | — | 13 nV/√Hz |
| Common-Mode Rejection Ratio | — | 106 dB at 60 Hz |
| Application Areas | — | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |