INA118U vs INA118UG4 Comparison
Detailed side-by-side comparison of INA118U by Texas Instruments and INA118UG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA118U - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118U ✓ ActiveTexas Instruments
INA118UG4 - 800 kHz Low-Power Instrumentation Amplifier | Texas Instruments
INA118UG4 ✓ ActiveSpecification Comparison
| Parameter | INA118U | INA118UG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Nominal Gain | 100 | — |
| Bandwidth | 800 kHz | — |
| Minimum Supply Voltage | ±2.25 V | — |
| Quiescent Current | 350 μA | — |
| Input Offset Voltage | 50 μV | 25 uV |
| Input Offset Voltage Drift | 0.5 μV/°C | — |
| Common-Mode Rejection | 110 dB at G = 1000 | — |
| Package | 8-pin SOIC (0.154 inch, 3.90 mm width) | 8-SOIC |
| Mounting Type | Surface mount | — |
| Operating Temperature Range | -40 °C to +85 °C | — |
| Package Options in INA118 Family | 8-pin plastic DIP and SO-8 surface-mount packages | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Architecture | — | Three-op-amp architecture |
| Small-Signal Bandwidth | — | 800 kHz |
| Bandwidth at Gain 100 | — | 70 kHz |
| Common-Mode Rejection Ratio | — | 98 dB |
| Gain Range | — | 1 to 10,000 |
| Gain Configuration | — | One external resistor |
| Input Circuitry | — | Current-feedback |
| Minimum Total Supply Voltage | — | ±1.35 V |
| Typical Dual Supply Voltage | — | ±15 V |
| Maximum Total Supply Voltage | — | ±18 V |
| Minimum Operating Temperature | — | -40 °C |
| Maximum Operating Temperature | — | [DATA_NEEDED: maximum operating temperature] |
| Package Width | — | 3.90 mm |
| Package Pitch | — | 1.27 mm |