INA118U vs INA118UG4 Comparaison
Comparaison détaillée côte à côte de INA118U par Texas Instruments et INA118UG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA118U - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118U ✓ ActifTexas Instruments
INA118UG4 - 800 kHz Low-Power Instrumentation Amplifier | Texas Instruments
INA118UG4 ✓ ActifComparaison des spécifications
| Paramètre | INA118U | INA118UG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Nominal Gain | 100 | — |
| Bandwidth | 800 kHz | — |
| Minimum Supply Voltage | ±2.25 V | — |
| Courant de repos | 350 μA | — |
| Input Offset Voltage | 50 μV | 25 uV |
| Input Offset Voltage Drift | 0.5 μV/°C | — |
| Common-Mode Rejection | 110 dB at G = 1000 | — |
| Boîtier | 8-pin SOIC (0.154 inch, 3.90 mm width) | 8-SOIC |
| Type de montage | Surface mount | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | — |
| Package Options in INA118 Family | 8-pin plastic DIP and SO-8 surface-mount packages | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Architecture | — | Three-op-amp architecture |
| Small-Signal Bandwidth | — | 800 kHz |
| Bandwidth at Gain 100 | — | 70 kHz |
| Common-Mode Rejection Ratio | — | 98 dB |
| Gain Range | — | 1 to 10,000 |
| Gain Configuration | — | One external resistor |
| Input Circuitry | — | Current-feedback |
| Minimum Total Supply Voltage | — | ±1.35 V |
| Typical Dual Supply Voltage | — | ±15 V |
| Maximum Total Supply Voltage | — | ±18 V |
| Minimum Operating Temperature | — | -40 °C |
| Maximum Operating Temperature | — | [DATA_NEEDED: maximum operating temperature] |
| Package Width | — | 3.90 mm |
| Package Pitch | — | 1.27 mm |