INA118UG4 vs INA118U Comparison
Detailed side-by-side comparison of INA118UG4 by Texas Instruments and INA118U by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA118UG4 - 800 kHz Low-Power Instrumentation Amplifier | Texas Instruments
INA118UG4 ✓ ActiveTexas Instruments
INA118U - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118U ✓ ActiveSpecification Comparison
| Parameter | INA118UG4 | INA118U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision low-power instrumentation amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Amplifier Architecture | Three-op-amp architecture | — |
| Small-Signal Bandwidth | 800 kHz | — |
| Bandwidth at Gain 100 | 70 kHz | — |
| Input Offset Voltage | 25 uV | 50 μV |
| Common-Mode Rejection Ratio | 98 dB | — |
| Gain Range | 1 to 10,000 | — |
| Gain Configuration | One external resistor | — |
| Input Circuitry | Current-feedback | — |
| Minimum Total Supply Voltage | ±1.35 V | — |
| Typical Dual Supply Voltage | ±15 V | — |
| Maximum Total Supply Voltage | ±18 V | — |
| Minimum Operating Temperature | -40 °C | — |
| Maximum Operating Temperature | [DATA_NEEDED: maximum operating temperature] | — |
| Package | 8-SOIC | 8-pin SOIC (0.154 inch, 3.90 mm width) |
| Package Width | 3.90 mm | — |
| Package Pitch | 1.27 mm | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Nominal Gain | — | 100 |
| Bandwidth | — | 800 kHz |
| Minimum Supply Voltage | — | ±2.25 V |
| Quiescent Current | — | 350 μA |
| Input Offset Voltage Drift | — | 0.5 μV/°C |
| Common-Mode Rejection | — | 110 dB at G = 1000 |
| Mounting Type | — | Surface mount |
| Operating Temperature Range | — | -40 °C to +85 °C |
| Package Options in INA118 Family | — | 8-pin plastic DIP and SO-8 surface-mount packages |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |