INA118UG4 vs INA118U 比較
詳細並排比較 INA118UG4 由 Texas Instruments 與 INA118U 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
INA118UG4 - 800 kHz Low-Power Instrumentation Amplifier | Texas Instruments
INA118UG4 ✓ 啟用中Texas Instruments
INA118U - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118U ✓ 啟用中規格比較
| 參數 | INA118UG4 | INA118U |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Precision low-power instrumentation amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Amplifier Architecture | Three-op-amp architecture | — |
| Small-Signal Bandwidth | 800 kHz | — |
| Bandwidth at Gain 100 | 70 kHz | — |
| Input Offset Voltage | 25 uV | 50 μV |
| Common-Mode Rejection Ratio | 98 dB | — |
| Gain Range | 1 to 10,000 | — |
| Gain Configuration | One external resistor | — |
| Input Circuitry | Current-feedback | — |
| Minimum Total Supply Voltage | ±1.35 V | — |
| Typical Dual Supply Voltage | ±15 V | — |
| Maximum Total Supply Voltage | ±18 V | — |
| Minimum Operating Temperature | -40 °C | — |
| Maximum Operating Temperature | [DATA_NEEDED: maximum operating temperature] | — |
| 封裝 | 8-SOIC | 8-pin SOIC (0.154 inch, 3.90 mm width) |
| Package Width | 3.90 mm | — |
| Package Pitch | 1.27 mm | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Nominal Gain | — | 100 |
| Bandwidth | — | 800 kHz |
| Minimum Supply Voltage | — | ±2.25 V |
| 靜態電流 | — | 350 μA |
| Input Offset Voltage Drift | — | 0.5 μV/°C |
| Common-Mode Rejection | — | 110 dB at G = 1000 |
| 安裝類型 | — | Surface mount |
| 工作溫度範圍 | — | -40 °C to +85 °C |
| Package Options in INA118 Family | — | 8-pin plastic DIP and SO-8 surface-mount packages |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |