INA126UA vs INA128UA Comparison
Detailed side-by-side comparison of INA126UA by Texas Instruments and INA128UA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA126UA - 36V Precision MicroPower Instrumentation Amplifier | TI
INA126UA ✓ ActiveSpecification Comparison
| Parameter | INA126UA | INA128UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Single-channel precision instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Maximum Supply Voltage | 36 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Dual-Supply Operating Range | ±1.35 V to ±18 V | — |
| Quiescent Current | 175 µA per channel | 700 uA |
| Input Offset Voltage | 250 µV maximum | — |
| Gain Bandwidth | 200 kHz | — |
| Common-Mode Rejection Ratio | 74 dB minimum | 130 dB |
| Architecture | Two-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier with current-feedback input circuitry |
| Gain Configuration | External resistor configuration | — |
| Package | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Mounting Type | Surface mount | Surface mount |
| Signal Type | Differential input, single-ended output | — |
| Application Category | Low-noise differential signal acquisition | — |
| RoHS Status | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Voltage Drift | — | 0.5 uV/degC |
| Maximum Input Bias Current | — | 5 nA |
| Gain Range | — | 1 to 10,000 V/V |
| Gain-Bandwidth Product | — | 1.3 MHz |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Protection Range | — | -40 V to +40 V |
| Supply Voltage Range | — | -18 V to +18 V |
| Minimum Dual Supply Voltage | — | -2.25 V to +2.25 V |
| Operating Temperature Range | — | -40 degC to +85 degC |