INA126UA vs INA128UA Comparaison
Comparaison détaillée côte à côte de INA126UA par Texas Instruments et INA128UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA126UA - 36V Precision MicroPower Instrumentation Amplifier | TI
INA126UA ✓ ActifComparaison des spécifications
| Paramètre | INA126UA | INA128UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Single-channel precision instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Maximum Supply Voltage | 36 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Dual-Supply Operating Range | ±1.35 V to ±18 V | — |
| Courant de repos | 175 µA per channel | 700 uA |
| Input Offset Voltage | 250 µV maximum | — |
| Gain Bandwidth | 200 kHz | — |
| Common-Mode Rejection Ratio | 74 dB minimum | 130 dB |
| Architecture | Two-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier with current-feedback input circuitry |
| Gain Configuration | External resistor configuration | — |
| Boîtier | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Type de montage | Surface mount | Surface mount |
| Signal Type | Differential input, single-ended output | — |
| Application Category | Low-noise differential signal acquisition | — |
| Statut RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Voltage Drift | — | 0.5 uV/degC |
| Maximum Input Bias Current | — | 5 nA |
| Gain Range | — | 1 to 10,000 V/V |
| Gain-Bandwidth Product | — | 1.3 MHz |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Protection Range | — | -40 V to +40 V |
| Supply Voltage Range | — | -18 V to +18 V |
| Minimum Dual Supply Voltage | — | -2.25 V to +2.25 V |
| Plage de température de fonctionnement | — | -40 degC to +85 degC |