INA128U vs INA126UAG4 Comparison
Detailed side-by-side comparison of INA128U by Texas Instruments and INA126UAG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | INA128U | INA126UAG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Device Type | Precision low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Two-op-amp architecture |
| Number of Amplifiers | 1 amplifier | — |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Quiescent Current | 700 µA | 175 µA per channel |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Gain Range | 1 to 100,000 | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Maximum Slew Rate | 4 V/µs | — |
| Maximum Gain-Bandwidth Product | 1.3 MHz | — |
| Package | 8-pin SOIC | 8-pin SOIC |
| Mounting Type | Surface mount | — |
| Operating Temperature Range | -40°C to +85°C | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Channels | — | 1 channel |
| Maximum Supply Voltage | — | 36 V |
| Typical Dual-Supply Voltage | — | ±15 V |
| Minimum Supply Voltage | — | ±1.35 V |
| Maximum Supply Voltage from Comparison Listing | — | ±18 V |
| Input Offset Voltage | — | 250 µV |
| Bandwidth | — | 200 kHz |
| Minimum Operating Temperature | — | -40 °C |
| Temperature Grade | — | Industrial |
| Package Width | — | 3.90 mm |
| Lead Form | — | Gull wing |
| Package Code | — | SOP |
| Package Shape | — | Rectangular |
| Supply Configuration | — | Single or dual supply |
| Input Signal | — | Differential |
| Gain Setting | — | External resistor |