INA128U vs INA126UAG4 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA128U disebabkan oleh Texas Instruments dan INA126UAG4 disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | INA128U | INA126UAG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | Precision low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Two-op-amp architecture |
| Number of Amplifiers | 1 amplifier | — |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Arus Dalam Tentera | 700 µA | 175 µA per channel |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Gain Range | 1 to 100,000 | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Maximum Slew Rate | 4 V/µs | — |
| Maximum Gain-Bandwidth Product | 1.3 MHz | — |
| Kemasan | 8-pin SOIC | 8-pin SOIC |
| Jenis Pemasangan | Surface mount | — |
| Gambaran Suhu Operasi | -40°C to +85°C | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Channels | — | 1 channel |
| Maximum Supply Voltage | — | 36 V |
| Typical Dual-Supply Voltage | — | ±15 V |
| Minimum Supply Voltage | — | ±1.35 V |
| Maximum Supply Voltage from Comparison Listing | — | ±18 V |
| Input Offset Voltage | — | 250 µV |
| Bandwidth | — | 200 kHz |
| Minimum Operating Temperature | — | -40 °C |
| Temperature Grade | — | Industrial |
| Package Width | — | 3.90 mm |
| Lead Form | — | Gull wing |
| Package Code | — | SOP |
| Package Shape | — | Rectangular |
| Supply Configuration | — | Single or dual supply |
| Input Signal | — | Differential |
| Gain Setting | — | External resistor |