INA128UA vs INA128HD Comparison
Detailed side-by-side comparison of INA128UA by Texas Instruments and INA128HD by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | INA128UA | INA128HD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision low-power instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Common-Mode Rejection Ratio | 130 dB | 130 dB |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | — |
| Quiescent Current | 700 uA | — |
| Gain Range | 1 to 10,000 V/V | 1 to 10,000 V/V |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Protection Range | -40 V to +40 V | — |
| Supply Voltage Range | -18 V to +18 V | 4.5 V to 36 V total, equivalent to ±18 V |
| Minimum Dual Supply Voltage | -2.25 V to +2.25 V | — |
| Operating Temperature Range | -40 degC to +85 degC | [DATA_NEEDED: operating temperature range] |
| Package | 8-pin SOIC, 3.90 mm width | 8-pin SOIC, 0.154 inch body width, 3.90 mm |
| Mounting Type | Surface mount | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | — |
| RoHS Status | Compliant | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Common-Mode Rejection Ratio at Gain 100 or Higher | — | 93 dB minimum |
| Typical Offset Voltage | — | 25 µV |
| Typical Input Bias Current | — | 50 nA |
| Slew Rate | — | 4 V/µs |
| Typical Quiescent Current | — | 700 µA |
| Maximum Input Protection Range | — | ±40 V |
| Gain-Setting Resistor | — | 49.4 kΩ |
| Packaging | — | Bulk |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |