INA128UA vs INA128HD Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA128UA tarafından Texas Instruments ve INA128HD tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA128UA | INA128HD |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Precision low-power instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Common-Mode Rejection Ratio | 130 dB | 130 dB |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | — |
| Durağan Akım | 700 uA | — |
| Gain Range | 1 to 10,000 V/V | 1 to 10,000 V/V |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Protection Range | -40 V to +40 V | — |
| Supply Voltage Range | -18 V to +18 V | 4.5 V to 36 V total, equivalent to ±18 V |
| Minimum Dual Supply Voltage | -2.25 V to +2.25 V | — |
| İşletim Sıcaklığı Aralığı | -40 degC to +85 degC | [DATA_NEEDED: operating temperature range] |
| Paket | 8-pin SOIC, 3.90 mm width | 8-pin SOIC, 0.154 inch body width, 3.90 mm |
| Montaj Türü | Surface mount | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | — |
| RoHS Durumu | Compliant | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Common-Mode Rejection Ratio at Gain 100 or Higher | — | 93 dB minimum |
| Typical Offset Voltage | — | 25 µV |
| Typical Input Bias Current | — | 50 nA |
| Slew Rate | — | 4 V/µs |
| Typical Quiescent Current | — | 700 µA |
| Maximum Input Protection Range | — | ±40 V |
| Gain-Setting Resistor | — | 49.4 kΩ |
| Packaging | — | Bulk |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |