INA129A vs INA129UA Comparison
Detailed side-by-side comparison of INA129A by Texas Instruments and INA129UA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA129A - Precision Instrumentation Amplifier | Texas Instruments
INA129A ✓ ActiveTexas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActiveSpecification Comparison
| Parameter | INA129A | INA129UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Supply Range | ±18 V | — |
| Gain Range | 1 to 10,000 | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | — |
| Low-Power Design | Low-power general-purpose instrumentation amplifier | — |
| Package | 8-pin SOIC | 8-pin SOIC (D) |
| Mounting Type | Surface mount | Surface mount |
| Input Circuit | Current-feedback input circuitry | — |
| External Gain Setting | Single external resistor | — |
| Application Class | Precision analog signal conditioning | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Amplifier Circuits | — | 1 circuit |
| Input Offset Voltage | — | 50 µV maximum |
| Input Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Common-Mode Rejection Ratio | — | 120 dB minimum |
| Input Protection Range | — | ±40 V |
| Supply Voltage Range | — | ±18 V maximum |
| Minimum Total Supply Voltage | — | 4.5 V |
| Maximum Gain | — | 10,000 V/V |
| Minimum Gain | — | 1 V/V |
| Gain Setting | — | Single external resistor |
| Input Noise at 1 kHz | — | 8 nV/√Hz typical |
| Operating Temperature Range | — | -40 °C to +125 °C |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |