INA129A vs INA129UA Comparación
Comparación detallada lado a lado de INA129A por Texas Instruments y INA129UA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA129A - Precision Instrumentation Amplifier | Texas Instruments
INA129A ✓ ActivoTexas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActivoComparación de especificaciones
| Parámetro | INA129A | INA129UA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Supply Range | ±18 V | — |
| Gain Range | 1 to 10,000 | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | — |
| Low-Power Design | Low-power general-purpose instrumentation amplifier | — |
| Encapsulado | 8-pin SOIC | 8-pin SOIC (D) |
| Tipo de montaje | Surface mount | Surface mount |
| Input Circuit | Current-feedback input circuitry | — |
| External Gain Setting | Single external resistor | — |
| Application Class | Precision analog signal conditioning | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Amplifier Circuits | — | 1 circuit |
| Input Offset Voltage | — | 50 µV maximum |
| Input Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Common-Mode Rejection Ratio | — | 120 dB minimum |
| Input Protection Range | — | ±40 V |
| Supply Voltage Range | — | ±18 V maximum |
| Minimum Total Supply Voltage | — | 4.5 V |
| Maximum Gain | — | 10,000 V/V |
| Minimum Gain | — | 1 V/V |
| Gain Setting | — | Single external resistor |
| Input Noise at 1 kHz | — | 8 nV/√Hz typical |
| Rango de temperatura de funcionamiento | — | -40 °C to +125 °C |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |