INA129PA vs INA114AP Comparison
Detailed side-by-side comparison of INA129PA by Texas Instruments and INA114AP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ ActiveSpecification Comparison
| Parameter | INA129PA | INA114AP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Maximum Input Offset Voltage | 50 uV | — |
| Maximum Input Offset Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | 2 nA |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Protected Input Voltage | -40 V to +40 V | — |
| Wide Supply Range | Plus or minus 18 V | — |
| Operating Temperature Range | -40 degC to +85 degC | -40°C to +85°C |
| Package | 8-pin plastic DIP | 8-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Gain-Setting Resistor | 49.4 kilohm | — |
| Gain Equation | [DATA_NEEDED: INA129 gain equation] | — |
| Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | 1 MHz |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Maximum Output Voltage | [DATA_NEEDED: maximum output voltage] | — |
| Maximum Output Current | [DATA_NEEDED: maximum output current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Voltage Drift | — | 0.25 µV/°C |
| Input Noise Density | — | 11 nV/√Hz |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Overvoltage Protection | — | ±40 V |
| Supply Voltage Range | — | ±18 V |
| Maximum Quiescent Current | — | 3 mA |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Long-Term Stability | — | Specified as excellent long-term stability |
| Compliance | — | RoHS and REACH status not stated |