INA129PA vs INA114AP So sánh

So sánh chi tiết song song của INA129PA bằng Texas Instruments và INA114AP bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
INA129PA INA129PA - Precision Low-Power Instrumentation Amplifier | TI

INA129PA - Precision Low-Power Instrumentation Amplifier | TI

INA129PA ✓ Hoạt động
Texas Instruments
INA114AP INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments

INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments

INA114AP ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số INA129PA INA114AP
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Device Type Precision, low-power instrumentation amplifier —
Number of Amplifiers 1 circuit —
Maximum Input Offset Voltage 50 uV —
Maximum Input Offset Drift 0.5 uV/degC —
Maximum Input Bias Current 5 nA 2 nA
Minimum Common-Mode Rejection Ratio 120 dB —
Maximum Protected Input Voltage -40 V to +40 V —
Wide Supply Range Plus or minus 18 V —
Khoảng nhiệt độ hoạt động -40 degC to +85 degC -40°C to +85°C
Hộp 8-pin plastic DIP 8-pin PDIP
Kiểu lắp đặt Through-hole Through-hole
Gain-Setting Resistor 49.4 kilohm —
Gain Equation [DATA_NEEDED: INA129 gain equation] —
Điện áp yên tĩnh [DATA_NEEDED: quiescent current] —
Gain Range [DATA_NEEDED: gain range] —
Gain-Bandwidth Product [DATA_NEEDED: gain-bandwidth product] 1 MHz
Slew Rate [DATA_NEEDED: slew rate] —
Maximum Output Voltage [DATA_NEEDED: maximum output voltage] —
Điện áp tối đa đầu ra [DATA_NEEDED: maximum output current] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Amplifier Type — Precision instrumentation amplifier
Number of Circuits — 1 circuit
Maximum Offset Voltage — 50 µV
Maximum Offset Voltage Drift — 0.25 µV/°C
Input Noise Density — 11 nV/√Hz
Minimum Common-Mode Rejection — 115 dB
Input Overvoltage Protection — ±40 V
Supply Voltage Range — ±18 V
Maximum Quiescent Current — 3 mA
Architecture — Three-op-amp instrumentation amplifier
Long-Term Stability — Specified as excellent long-term stability
Compliance — RoHS and REACH status not stated

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá