INA129SHKQ vs INA129UA Comparison
Detailed side-by-side comparison of INA129SHKQ by Texas Instruments and INA129UA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActiveSpecification Comparison
| Parameter | INA129SHKQ | INA129UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Number of Channels | 1 channel | — |
| Closed-Loop Gain | 10 V/V | — |
| Programmable Gain Range | 1 to 10000 V/V | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 4 V/µs | — |
| Supply Voltage | ±18 V | — |
| Operating Temperature Range | -55°C to 210°C | -40 °C to +125 °C |
| Offset Voltage | 25 µV typical | — |
| Input Bias Current | 50 nA typical | 5 nA maximum |
| Common-Mode Rejection | 95 dB typical | — |
| Common-Mode Rejection at Gain ≥100 | 93 dB | — |
| Input Protection Range | ±40 V | ±40 V |
| Quiescent Current | 2 mA typical | — |
| Package | 8-pin ceramic SOIC, 0.220-inch body width | 8-pin SOIC (D) |
| Terminal Count | 8 terminals | — |
| Mounting Type | Gull-wing surface mount | Surface mount |
| Temperature Grade | Military high-temperature grade | — |
| Gain Equation Compatibility | Compatible with AD620 gain equation | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Amplifier Circuits | — | 1 circuit |
| Input Offset Voltage | — | 50 µV maximum |
| Input Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Common-Mode Rejection Ratio | — | 120 dB minimum |
| Supply Voltage Range | — | ±18 V maximum |
| Minimum Total Supply Voltage | — | 4.5 V |
| Maximum Gain | — | 10,000 V/V |
| Minimum Gain | — | 1 V/V |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Noise at 1 kHz | — | 8 nV/√Hz typical |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |