INA129SHKQ vs INA129UA Comparaison
Comparaison détaillée côte à côte de INA129SHKQ par Texas Instruments et INA129UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActifComparaison des spécifications
| Paramètre | INA129SHKQ | INA129UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Number of Channels | 1 channel | — |
| Closed-Loop Gain | 10 V/V | — |
| Programmable Gain Range | 1 to 10000 V/V | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 4 V/µs | — |
| Tension d'alimentation | ±18 V | — |
| Plage de température de fonctionnement | -55°C to 210°C | -40 °C to +125 °C |
| Offset Voltage | 25 µV typical | — |
| Input Bias Current | 50 nA typical | 5 nA maximum |
| Common-Mode Rejection | 95 dB typical | — |
| Common-Mode Rejection at Gain ≥100 | 93 dB | — |
| Input Protection Range | ±40 V | ±40 V |
| Courant de repos | 2 mA typical | — |
| Boîtier | 8-pin ceramic SOIC, 0.220-inch body width | 8-pin SOIC (D) |
| Terminal Count | 8 terminals | — |
| Type de montage | Gull-wing surface mount | Surface mount |
| Temperature Grade | Military high-temperature grade | — |
| Gain Equation Compatibility | Compatible with AD620 gain equation | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Amplifier Circuits | — | 1 circuit |
| Input Offset Voltage | — | 50 µV maximum |
| Input Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Common-Mode Rejection Ratio | — | 120 dB minimum |
| Supply Voltage Range | — | ±18 V maximum |
| Minimum Total Supply Voltage | — | 4.5 V |
| Maximum Gain | — | 10,000 V/V |
| Minimum Gain | — | 1 V/V |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Noise at 1 kHz | — | 8 nV/√Hz typical |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |