INA129UA vs INA129A Comparison
Detailed side-by-side comparison of INA129UA by Texas Instruments and INA129A by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActiveTexas Instruments
INA129A - Precision Instrumentation Amplifier | Texas Instruments
INA129A ✓ ActiveSpecification Comparison
| Parameter | INA129UA | INA129A |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Precision instrumentation amplifier | — |
| Number of Amplifier Circuits | 1 circuit | — |
| Input Offset Voltage | 50 µV maximum | — |
| Input Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Common-Mode Rejection Ratio | 120 dB minimum | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±18 V maximum | — |
| Minimum Total Supply Voltage | 4.5 V | — |
| Maximum Gain | 10,000 V/V | — |
| Minimum Gain | 1 V/V | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Input Noise at 1 kHz | 8 nV/√Hz typical | — |
| Operating Temperature Range | -40 °C to +125 °C | — |
| Package | 8-pin SOIC (D) | 8-pin SOIC |
| Mounting Type | Surface mount | Surface mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Supply Range | — | ±18 V |
| Gain Range | — | 1 to 10,000 |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 120 dB |
| Input Protection | — | ±40 V |
| Low-Power Design | — | Low-power general-purpose instrumentation amplifier |
| Input Circuit | — | Current-feedback input circuitry |
| External Gain Setting | — | Single external resistor |
| Application Class | — | Precision analog signal conditioning |