INA129UA vs INA129A Comparación
Comparación detallada lado a lado de INA129UA por Texas Instruments y INA129A por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActivoTexas Instruments
INA129A - Precision Instrumentation Amplifier | Texas Instruments
INA129A ✓ ActivoComparación de especificaciones
| Parámetro | INA129UA | INA129A |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Precision instrumentation amplifier | — |
| Number of Amplifier Circuits | 1 circuit | — |
| Input Offset Voltage | 50 µV maximum | — |
| Input Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Common-Mode Rejection Ratio | 120 dB minimum | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±18 V maximum | — |
| Minimum Total Supply Voltage | 4.5 V | — |
| Maximum Gain | 10,000 V/V | — |
| Minimum Gain | 1 V/V | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Input Noise at 1 kHz | 8 nV/√Hz typical | — |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | — |
| Encapsulado | 8-pin SOIC (D) | 8-pin SOIC |
| Tipo de montaje | Surface mount | Surface mount |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Supply Range | — | ±18 V |
| Gain Range | — | 1 to 10,000 |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 120 dB |
| Input Protection | — | ±40 V |
| Low-Power Design | — | Low-power general-purpose instrumentation amplifier |
| Input Circuit | — | Current-feedback input circuitry |
| External Gain Setting | — | Single external resistor |
| Application Class | — | Precision analog signal conditioning |