INA132UA vs INA133UG4 Comparison
Detailed side-by-side comparison of INA132UA by Texas Instruments and INA133UG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments
INA133UG4 ✓ ActiveSpecification Comparison
| Parameter | INA132UA | INA133UG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Low-power, unity-gain difference amplifier | Precision difference amplifier |
| Number of Channels | 1 channel | — |
| Gain | 1 V/V (unity gain) | — |
| Single-Supply Voltage Range | Up to 36 V | — |
| Dual-Supply Voltage Range | ±18 V | — |
| Quiescent Current | 160 uA | 950 µA |
| Gain-Bandwidth Product | 300 kHz | — |
| Input Offset Voltage | 500 uV maximum | 150 µV minimum; 450 µV maximum |
| Gain Error | ±0.075% maximum | — |
| Nonlinearity | 0.001% maximum | — |
| Common-Mode Rejection | 90 dB minimum | — |
| Slew Rate | 100 mV/us minimum | 5 V/µs |
| Operating Temperature Range | -55°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Package | 8-pin SOIC | 8-SOIC (0.154 inch, 3.90 mm width) |
| Mounting Type | Surface mount | Surface mount |
| Internal Gain Resistors | Laser trimmed | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Circuits | — | 1 circuit |
| -3 dB Bandwidth | — | 1.5 MHz |
| Supply Voltage Range | — | 4.5 V to 36 V |
| Output Voltage Range | — | ±2.25 V to ±18 V |
| Differential Gain | — | 1 V/V |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Noise Density | — | [DATA_NEEDED: input noise density] |
| Rail-to-Rail Output | — | [DATA_NEEDED: rail-to-rail output capability] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |