INA132UA vs INA133UG4 Comparaison
Comparaison détaillée côte à côte de INA132UA par Texas Instruments et INA133UG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments
INA133UG4 ✓ ActifComparaison des spécifications
| Paramètre | INA132UA | INA133UG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Low-power, unity-gain difference amplifier | Precision difference amplifier |
| Number of Channels | 1 channel | — |
| Gain | 1 V/V (unity gain) | — |
| Single-Supply Voltage Range | Up to 36 V | — |
| Dual-Supply Voltage Range | ±18 V | — |
| Courant de repos | 160 uA | 950 µA |
| Gain-Bandwidth Product | 300 kHz | — |
| Input Offset Voltage | 500 uV maximum | 150 µV minimum; 450 µV maximum |
| Gain Error | ±0.075% maximum | — |
| Nonlinearity | 0.001% maximum | — |
| Common-Mode Rejection | 90 dB minimum | — |
| Slew Rate | 100 mV/us minimum | 5 V/µs |
| Plage de température de fonctionnement | -55°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin SOIC | 8-SOIC (0.154 inch, 3.90 mm width) |
| Type de montage | Surface mount | Surface mount |
| Internal Gain Resistors | Laser trimmed | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Circuits | — | 1 circuit |
| -3 dB Bandwidth | — | 1.5 MHz |
| Supply Voltage Range | — | 4.5 V to 36 V |
| Plage de tension de sortie | — | ±2.25 V to ±18 V |
| Differential Gain | — | 1 V/V |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Densité de bruit | — | [DATA_NEEDED: input noise density] |
| Rail-to-Rail Output | — | [DATA_NEEDED: rail-to-rail output capability] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |