INA141P vs INA128PA Comparison
Detailed side-by-side comparison of INA141P by Texas Instruments and INA128PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P UnknownSpecification Comparison
| Parameter | INA141P | INA128PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Unknown | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.00 | $0.00 |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Available Gain Settings | 10 and 100 V/V | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 117 dB | 120 dB |
| Input Protection | ±40 V | ±40 V |
| Supply Range | ±18 V | Up to ±18 V |
| Architecture | Three-op-amp instrumentation-amplifier design | Three-op-amp instrumentation amplifier |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Operating Temperature Range | -40 °C to +85 °C | — |
| Package | 8-pin plastic DIP | 8-pin PDIP |
| Package Pin Count | 8 pins | — |
| Mounting Type | Through-hole | Through-hole |
| Low-Power Supply Current | [DATA_NEEDED: maximum quiescent current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| RoHS Status | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Quiescent Current | — | 700 µA |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | Single external resistor |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Operating Temperature | — | -40°C to +85°C |