INA141P vs INA128PA Comparaison
Comparaison détaillée côte à côte de INA141P par Texas Instruments et INA128PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P UnknownComparaison des spécifications
| Paramètre | INA141P | INA128PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $0,00 |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Available Gain Settings | 10 and 100 V/V | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 117 dB | 120 dB |
| Input Protection | ±40 V | ±40 V |
| Supply Range | ±18 V | Up to ±18 V |
| Architecture | Three-op-amp instrumentation-amplifier design | Three-op-amp instrumentation amplifier |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Plage de température de fonctionnement | -40 °C to +85 °C | — |
| Boîtier | 8-pin plastic DIP | 8-pin PDIP |
| Package Pin Count | 8 pins | — |
| Type de montage | Through-hole | Through-hole |
| Low-Power Supply Current | [DATA_NEEDED: maximum quiescent current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Statut RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Courant de repos | — | 700 µA |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | Single external resistor |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Température de fonctionnement | — | -40°C to +85°C |