INA2126U vs INA2126P Comparison
Detailed side-by-side comparison of INA2126U by Texas Instruments and INA2126P by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ ActiveTexas Instruments
INA2126P - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126P ✓ ActiveSpecification Comparison
| Parameter | INA2126U | INA2126P |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Dual precision instrumentation amplifier | — |
| Number of Channels | 2 channels | 2 channels |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Quiescent Current per Channel | 175 µA | — |
| Maximum Input Offset Voltage | 250 µV | — |
| Minimum Voltage Gain | 5 V/V | — |
| Maximum Voltage Gain | 10000 V/V | — |
| Typical Gain-Bandwidth Product | 200 kHz | — |
| Typical Input Noise Density at 1 kHz | 0.4 nV/√Hz | — |
| Internal Architecture | Two-op-amp instrumentation amplifier | — |
| Package | 16-pin SOIC | 16-PDIP |
| Mounting Type | Surface mount | Through-hole |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: Input bias current] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: Common-mode rejection ratio] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Architecture | — | Two-op-amp instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Operating Voltage Range | — | ±1.35 V to ±18 V |
| Quiescent Current | — | 175 µA/channel |
| Offset Voltage | — | 250 µV |
| Input Type | — | Differential |
| Application | — | Low-noise differential-signal acquisition |
| Circuit Count | — | 2 circuits |
| Packaging | — | Tube |
| Product Type | — | Precision instrumentation amplifier |
| Supply Current | — | 350 µA for two channels |
| Gain Range | — | [DATA_NEEDED: Gain range] |
| Gain Bandwidth Product | — | [DATA_NEEDED: Gain bandwidth product] |