INA2126U vs INA2126P 比較
詳細な並列比較: INA2126U メーカー: Texas Instruments および INA2126P メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ 生産中Texas Instruments
INA2126P - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126P ✓ 生産中仕様比較
| パラメータ | INA2126U | INA2126P |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Dual precision instrumentation amplifier | — |
| Number of Channels | 2 channels | 2 channels |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Quiescent Current per Channel | 175 µA | — |
| Maximum Input Offset Voltage | 250 µV | — |
| Minimum Voltage Gain | 5 V/V | — |
| Maximum Voltage Gain | 10000 V/V | — |
| Typical Gain-Bandwidth Product | 200 kHz | — |
| Typical Input Noise Density at 1 kHz | 0.4 nV/√Hz | — |
| Internal Architecture | Two-op-amp instrumentation amplifier | — |
| パッケージ | 16-pin SOIC | 16-PDIP |
| 実装タイプ | Surface mount | Through-hole |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: Input bias current] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: Common-mode rejection ratio] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Architecture | — | Two-op-amp instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Operating Voltage Range | — | ±1.35 V to ±18 V |
| 静止電流 | — | 175 µA/channel |
| Offset Voltage | — | 250 µV |
| Input Type | — | Differential |
| Application | — | Low-noise differential-signal acquisition |
| Circuit Count | — | 2 circuits |
| Packaging | — | Tube |
| Product Type | — | Precision instrumentation amplifier |
| 電源電流 | — | 350 µA for two channels |
| Gain Range | — | [DATA_NEEDED: Gain range] |
| Gain Bandwidth Product | — | [DATA_NEEDED: Gain bandwidth product] |