IRSM808-105MHTR vs IRSM808-105MH Comparison
Detailed side-by-side comparison of IRSM808-105MHTR by Infineon and IRSM808-105MH by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | IRSM808-105MHTR | IRSM808-105MH |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Topology | Half-Bridge (High-Side + Low-Side) | Half-bridge (2 FREDFET switches + HVIC driver) |
| Drain-Source Blocking Voltage (VDS) | 500 V | 500 V |
| Continuous Output Current | 10 A | — |
| Continuous Motor Power | 200 W | — |
| Power Switch Technology | Trench FREDFET (low RDS(on) MOSFET) | — |
| Logic Supply Voltage (VCC) | 13.5 V to 16.5 V | — |
| Gate Driver | Integrated high-voltage level-shift HVIC | Integrated HVIC (half-bridge, bootstrap) |
| Bootstrap Diode | Integrated | — |
| Dead-Time Generation | Integrated (prevents cross-conduction) | Internal (configurable via DT pin) |
| Protection Features | Over-current, Under-voltage lockout (UVLO), Thermal shutdown | — |
| Logic Input Compatibility | 3.3 V / 5 V CMOS | — |
| Package | 31-PQFN (8x9 mm) with exposed thermal pad | 31-PQFN 8x9 mm (also called QFN 8x9, isolated) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | -40C to +125C (junction) | -40C to +125C (TJ) |
| Isolation | Electrically isolated thermal pad (high-voltage creepage per IPM package) | — |
| MSL Level | 3 (per JEDEC J-STD-020) | 3 |
| RoHS Status | Compliant | Compliant |
| Continuous Drain Current (ID @ TC=25C) | — | 10 A |
| Static Drain-Source On-Resistance (RDS(on)) | — | 0.8 ohm max |
| Maximum Switching Power | — | 200 W |
| Supply Voltage (VCC) | — | 15 V typical |
| Bootstrap Supply (VB) | — | up to 500 V + 15 V |
| Under-Voltage Lockout (UVLO) | — | Yes (VCC and VBS) |
| Logic Input Voltage (HIN/LIN) | — | 3.3 V / 5 V compatible |
| Fault Output | — | Yes (active-low FAULT pin) |
| Isolation Voltage | — | 1500 Vrms (per package, functional isolation) |