ISO120SG vs ISO120G-BI Comparison
Detailed side-by-side comparison of ISO120SG by Texas Instruments and ISO120G-BI by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ISO120G-BI - 60 kHz Precision Isolation Amplifier | Texas Instruments
ISO120G-BI NrndSpecification Comparison
| Parameter | ISO120SG | ISO120G-BI |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Unknown | NRND |
| Product Type | Precision low-cost isolation amplifier | Precision isolation amplifier |
| Isolation Architecture | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier | — |
| Signal Bandwidth | 60 kHz | 60 kHz |
| Isolation Voltage Rating | 1500 Vrms | — |
| Nonlinearity | ±0.01% maximum at the precision operating condition | — |
| Input Offset Voltage Drift | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition | — |
| Common-Mode Rejection | High IMR at 60 Hz | — |
| Carrier Frequency | User controlled | User controlled |
| Supply Operation | Bipolar operation | — |
| Number of Circuits | 1 isolation amplifier per package | 1 circuit |
| Package Information | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing | — |
| Package Family | Ceramic dual in-line package (CDIP) | — |
| Partial Discharge Qualification | 100% tested for partial discharge | 100% tested |
| External Components | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation | — |
| Synchronization | ISO120 family synchronization feature | — |
| Operating Temperature | [DATA_NEEDED: ISO120SG operating temperature range] | — |
| Supply Voltage | [DATA_NEEDED: ISO120SG supply voltage range] | — |
| Input Differential Voltage Range | [DATA_NEEDED: ISO120SG input differential voltage range] | — |
| Output Voltage Range | [DATA_NEEDED: ISO120SG output voltage range] | — |
| RoHS Status | [DATA_NEEDED: ISO120SG RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: ISO120SG REACH status] | [DATA_NEEDED: REACH compliance status] |
| Rated Isolation Voltage | — | 1500 Vrms |
| Maximum Nonlinearity | — | 0.01% |
| Precision Configuration Bandwidth | — | 6 kHz |
| Maximum Voltage-Offset Drift | — | 150 uV/°C |
| Input Common-Mode Rejection | — | High at 60 Hz |
| Operation | — | Bipolar |
| Package | — | 16-lead CDIP |
| Package Pitch | — | 7.62 mm |
| Package Length | — | 0.300 inch |
| Mounting Type | — | Through-hole |
| External Components for 60 kHz Bandwidth | — | None required |
| External Capacitors for Guaranteed Precision | — | 2 capacitors |
| Lifecycle Recommendation | — | Not recommended for new designs |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |