ISO120SG vs ISO120G-BI So sánh
So sánh chi tiết song song của ISO120SG bằng Texas Instruments và ISO120G-BI bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
ISO120G-BI - 60 kHz Precision Isolation Amplifier | Texas Instruments
ISO120G-BI NrndSo sánh thông số kỹ thuật
| Tham số | ISO120SG | ISO120G-BI |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Unknown | NRND |
| Product Type | Precision low-cost isolation amplifier | Precision isolation amplifier |
| Isolation Architecture | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier | — |
| Signal Bandwidth | 60 kHz | 60 kHz |
| Isolation Voltage Rating | 1500 Vrms | — |
| Nonlinearity | ±0.01% maximum at the precision operating condition | — |
| Input Offset Voltage Drift | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition | — |
| Common-Mode Rejection | High IMR at 60 Hz | — |
| Carrier Frequency | User controlled | User controlled |
| Supply Operation | Bipolar operation | — |
| Number of Circuits | 1 isolation amplifier per package | 1 circuit |
| Package Information | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing | — |
| Package Family | Ceramic dual in-line package (CDIP) | — |
| Partial Discharge Qualification | 100% tested for partial discharge | 100% tested |
| External Components | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation | — |
| Synchronization | ISO120 family synchronization feature | — |
| Nhiệt độ hoạt động | [DATA_NEEDED: ISO120SG operating temperature range] | — |
| Điện áp cung cấp | [DATA_NEEDED: ISO120SG supply voltage range] | — |
| Input Differential Voltage Range | [DATA_NEEDED: ISO120SG input differential voltage range] | — |
| Khoảng điện áp đầu ra | [DATA_NEEDED: ISO120SG output voltage range] | — |
| Trạng thái RoHS | [DATA_NEEDED: ISO120SG RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: ISO120SG REACH status] | [DATA_NEEDED: REACH compliance status] |
| Rated Isolation Voltage | — | 1500 Vrms |
| Maximum Nonlinearity | — | 0.01% |
| Precision Configuration Bandwidth | — | 6 kHz |
| Maximum Voltage-Offset Drift | — | 150 uV/°C |
| Input Common-Mode Rejection | — | High at 60 Hz |
| Operation | — | Bipolar |
| Hộp | — | 16-lead CDIP |
| Package Pitch | — | 7.62 mm |
| Package Length | — | 0.300 inch |
| Kiểu lắp đặt | — | Through-hole |
| External Components for 60 kHz Bandwidth | — | None required |
| External Capacitors for Guaranteed Precision | — | 2 capacitors |
| Lifecycle Recommendation | — | Not recommended for new designs |
| Khoảng nhiệt độ hoạt động | — | [DATA_NEEDED: operating temperature range] |