ISO1432DWR vs ISO1430DWR Comparison
Detailed side-by-side comparison of ISO1432DWR by Texas Instruments and ISO1430DWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ ActiveSpecification Comparison
| Parameter | ISO1432DWR | ISO1430DWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Drivers, Receivers, Transceivers | Interface ICs |
| Lifecycle Status | Active | Active |
| Function | Transceiver, Isolated | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Data Rate (max) | 12 Mbps | — |
| Isolation Voltage | 5000 Vrms (reinforced) | — |
| Supply Voltage (Vcc1, Vcc2) | 3 V to 5.5 V | — |
| Operating Temperature | -40 °C to +125 °C | — |
| Package | 16-pin SOIC (DW) | 16-pin SOIC (DW) |
| Mounting Type | Surface Mount | Surface mount |
| Receiver Hysteresis | [DATA_NEEDED: typical value] | — |
| Bus Pin ESD (HBM) | [DATA_NEEDED: HBM rating] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value] | [DATA_NEEDED: common-mode transient immunity] |
| UL Recognition | UL 1577 recognized | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| MSL Level | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Galvanically isolated half-duplex RS-485 and RS-422 transceiver |
| Maximum Data Rate | — | 12 Mbps |
| Isolation Rating | — | 5 kVrms |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Duplex Mode | — | Half-duplex |
| EMC Protection | — | Protected against ESD and EFT bus events |
| Interface Standards | — | TIA/EIA RS-485 and RS-422 |
| Operating Temperature Range | — | -40°C to +125°C |
| Logic Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| ESD Protection Rating | — | [DATA_NEEDED: ESD protection rating] |
| EFT Protection Rating | — | [DATA_NEEDED: EFT protection rating] |
| Isolation Capacitance | — | [DATA_NEEDED: isolation capacitance] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |
| REACH Status | — | [DATA_NEEDED: REACH status] |