ISO1432DWR vs ISO1430DWR 비교
다음의 상세 나란히 비교: ISO1432DWR 제조: Texas Instruments 및 ISO1430DWR 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ 활성사양 비교
| 파라미터 | ISO1432DWR | ISO1430DWR |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Drivers, Receivers, Transceivers | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 기능 | Transceiver, Isolated | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Data Rate (max) | 12 Mbps | — |
| Isolation Voltage | 5000 Vrms (reinforced) | — |
| Supply Voltage (Vcc1, Vcc2) | 3 V to 5.5 V | — |
| 동작 온도 | -40 °C to +125 °C | — |
| 패키지 | 16-pin SOIC (DW) | 16-pin SOIC (DW) |
| 실장 유형 | Surface Mount | Surface mount |
| Receiver Hysteresis | [DATA_NEEDED: typical value] | — |
| Bus Pin ESD (HBM) | [DATA_NEEDED: HBM rating] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value] | [DATA_NEEDED: common-mode transient immunity] |
| UL Recognition | UL 1577 recognized | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Galvanically isolated half-duplex RS-485 and RS-422 transceiver |
| Maximum Data Rate | — | 12 Mbps |
| Isolation Rating | — | 5 kVrms |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Duplex Mode | — | Half-duplex |
| EMC Protection | — | Protected against ESD and EFT bus events |
| Interface Standards | — | TIA/EIA RS-485 and RS-422 |
| 동작 온도 범위 | — | -40°C to +125°C |
| Logic Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| ESD Protection Rating | — | [DATA_NEEDED: ESD protection rating] |
| EFT Protection Rating | — | [DATA_NEEDED: EFT protection rating] |
| Isolation Capacitance | — | [DATA_NEEDED: isolation capacitance] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |
| REACH Status | — | [DATA_NEEDED: REACH status] |